Japanese small Tansu, Merchant chest, box, late Meiji period, 18" high, 24" wide, 14" deep, Cyprus and Cedar wood, two(2) medium size drawers next to three(3) smaller drawers above one(1) long drawer on the bottom. Hardware is old black iron, shows some wear and tear, some rust, small broken pieces.

Japanese small Tansu, Meiji period, late 19th Century, 21" high, 22" wide, 11" deep, one(1) long drawer above three(3) short drawers on the left side, hidden drawers behind blind door on the right side, mounted with heavy black iron hardware. The condition is all original, as found condition and the lock compartment inside is missing.

An antique Japanese Haribako (sewing box) made of Tochinoki (Horse Chestnut) and Kiri (Paulownia) woods. Rare connected double Pine needle bronze handles representing good luck and longevity with Gumbai shaped hinges on the top. Vertical slot on the right upper back that was originally used to store a textile ruler called Shaku...

Japanese tall Kiri wood Hibachi, low relief Lacquered Bird on Grape vine, Ca. late Meiji period, 1910's, 11 1/4" high, 5 1/2" wide-widest part, 4 1/2" x 5" wide-top rim, the condition is good.

Japanese Pine Wood Bun Steamer Rack or Steamer Frame, can be used as a Display Shelf on the wall, originally used as a steaming Buns inside the large pots, 18 1/2" high, 18 1/2" wide, 6 1/4" deep, unique interlocking work, as used condition.

Japanese black lacquered on woven Bamboo Trunk, with red lacquered wooden frame on the bottom, Ca. 1920's, 14 1/2" high, 27 1/4" x 15 1/4" wide, two(2) black iron lock compartment on the side and large handles in front and back and corners are wrapped around with black iron. Wooden stretchers on the bottom to support for strength, blue rice paper lining inside the top and the bottom. Some black lacquer loses on the surface and corners are worn.

Pair Japanese Lacquered Lotus flower decorated on Kiri wood Hibachi with Copper lining, Ca. late meiji period, 1910's, 4 1/4" diameter-maximum outside top measurement, 3 1/4" high, with raised Maki lacquer Lotus flower design on one(1) side. The copper lining has been cleaned and polished and in good condition.

Japanese black lacquered woven Bamboo Trunk, Meiji period, early 1900's, 11" high, 25" x 15" wide, with large and heavy black iron handles supported by wooden board on both side, paper lining inside and metal hinges on top to open one side of the top cover. This Bamboo Trunk is good to storing Dolls and other necessary light weight items. There are some black lacquer loses on the surface.

Japanese Sliding Door framed by Kiri Wood and Bamboo, 36 1/2" high, 1 1/4" thick, nice old warm Kiri, Reed and Bamboo framed Sliding Door, the condition is good.

Japanese Two(2) pieces U shape heavy Black Wrought Iron Side Locks, 9" high, 3 1/2" wide(maximum outer measurement, 8 3/4" high, 3" wide, (inner measurement), 1/2" thick, Pin(2 1/2" deep), this set looks like two(2) divided area to put through heavy wood Rod for both sides and carry on two(2) men's shoulder, one in front and one in the back, with original attached heavy duty Iron nails or pins.

Candle stand made of wood and bamboo. The wick and the saucer are made of copper. In excellent condition except for a hairline in the bamboo, but no problem for use. The first half of the 20th century. H:39cm Diameter of the bottom:18cm

Two(2) Japanese Black Wrought Iron heavy weight solid Tansu Chest Hardware or Drawer Handles, 2 different sizes, Larger handle with carved pierced Back plate(7" wide, 1 1/8" high=outer measurement, and original nail and hole(4 1/4" wide). Smaller handle only without back plate(5" wide outer maximum measurement, 3" wide(inner top measurement), 1 5/8" high maximum height.

Seven(7) pieces heavy weight Black Wrought Iron and Brass Japanese Tansu or Furniture Hardware, 2 handles with original nail(larger=3 3/8" wide inner measurement, 3 3/4" wide=outer, 1 3/4" high), (smaller=2 5/8" wide=outer measurement, 2 3/8" inner),1 1/4" high), corner(2" x 2" wide), round ring(1 3/4" diameter), small roung ring with flower shape back plate(ring=1 1/8" diameter, nail=1 1/2" deep), roung small nail(nail head=1/2" diameter, 1 1/2" deep), long brass piece(5 3/4" long, 1/2" wide).

Japanese Sliding Door, framed by Kiri Wood panel in upper section and Reed vertical Reed panel framed by brown Lacquered wood Frame, 68 1/2" high, 34" wide, 1 1/4" thick, small area about 6" long Reed pieces are broken off.

Three(3) pieces Japanese heavy weight Black Wrought Iron U Shape side Locks and Handles, side handles for 2 pieces Tansu(chest on chest), Tansu side handles for top piece, and use as a lock to the top piece from lower piece together as one(1) Tansu, 6" high, 3 5/8" wide=maximum outer measurement), 5 3/8" high, 2 5/8" wide=inner measurement).

Japanese one-piece tree trunk heavy wood stand, almost big enough to display a life size statue. 23" x 23" x 23" in triangle, 2 1/2" to 3" thick. It will be great to show off armors, flower arrangements, bonsai or your treasures (tall?).

Old Japanese teppo (pistol) style candle holders which appear to be made from old pieces. Each piece is 21 inches long and quite heavy. These will probably work well along the wall of a country style room.

A wonderful cabinet or desk top wood box. It looks nice enough to place in your living room. New condition. Dimensions: 7 1/2 inches wide x 9 1/2 inches tall x 8 1/2 inches deep