Japanese clothing tansu from the Nagoya region, with its original finish and beautiful woodgrain with a kiri wood front and lacquered sugi frame. Its features include six drawers with iron hirute handles, iron locks with brass flowers, lockbox with kan/ring-shaped pull, and iron handles on either side. Key included. Size: 40" height, 45" width, 16" depth

An antique Japanese Iwayado Kimono Tansu made of Kiri (Paulownia) and Sugi (Cryptomeria) woods. All original Urushi lacquer finish with hand forged iron hardware. Warabite style handles and Kiri Leaf designed lock plates. A single section chest used for Kimono storage consisting of 4 large drawers, 2 small drawers and a security door behind which 4 smaller drawers were used to store valuables.

Age: Edo Period (1800-1850)

Dimensions: 48 1/4" Wide by 37" High by 17 1/4" Deep

An antique Japanese Iwayado Tansu made of Kiri (Paulownia) and Yamasugi (slow growth mountain Cryptomeria) woods. All original hand forged iron hardware and Urushi lacquer finish. Main top drawer lock plate has a flying Phoenix with surrounding drawer lock plates featuring Paulownia leaves from which the bird drinks the collected dew to get its energy. A locking bar secures two drawers and a hinged door opens to access four small drawers...

Antique Japanese tansu from the Iwayado area. Made with Sugi (cypress) wood frame and dramatic Keyaki (elm) burl front panels, in original red/orange lacquer finish. The extensive iron plating is incised into flowers and Kiri leaves; The top drawer features a large flying Phoenix as its lock plate...

An antique Japanese Kadai (Bonsai or Ikebana display table) made of Rosewood. Cabriolet legs in a low profile design. Floating display surface prevents age cracks from occurring.

Age: Late Meiji-Taisho (1900-1920)Dimensions: 18" Wide by 5 1/8" High by 12 1/8" Deep

An antique Japanese 2 section Kaidan (step chest) made of Keyaki (Zelkova) and Hinoki (Cypress) woods. All original iron hardware including the Hikute style handles. Upper section has 3 sets of hinged doors and lower section has a pair of sliding doors with 4 drawers of varying sizes. Stair incline is from right to left with 8 steps.

The Kaidan is one of the best examples of Japanese ingenuity...

An antique Japanese Kaidan (stair chest) made of Keyaki (Zelkova) and Hinoki (Cypress) woods. All original Benigara finish on frame. Original hand forged iron hardware. 2 pairs of sliding doors and hinged door open to 3 spacious storage areas. 3 drawers for additional storage.

Unique safety protrusions on each step for secure footing when climbing stairs...

An antique Japanese Two-Section Kaidan Tansu (stair chest) made of Keyaki (Zelkova) and Suginoki (Cryptomeria) woods. Original hand forged iron hardware including the Hirute handles. Made in two sections allowing for easier placement through a door or entrance. Drawers of varying sizes for organizing with a large hinged door with spacious storage behind and a lift out door on the top step with two wooden hooks where security keys were kept...

An antique Japanese Kake Suzuribako (aka calligraphy merchant box) made of Kuri (Chestnut) wood. All original finish and hand forged iron hardware. Hinged lid opens to a storage area where an inkstone and Sumi (ink sticks) were kept. The remainder of the top has a slot where coins were inserted to be kept in the upper drawer out of the sight of wondering eyes. Two additional drawers were used to keep calligraphy brushes and Washi paper used for writing...

An antique Japanese 2 Section Kamidana Tansu made of Keyaki (Zelkova), Hinoki (Cypress) and Suginoki (Cryptomeria) woods. The top section was used as a Shinto shrine with a multi-level platform and original paper charms still attached to the interior walls. Built into the platform are sliding doors where Shinto religious artifacts were stored.

The bottom section has three large drawers, each with spacious storage...

An antique Japanese Kanazawa Mizuya Tansu in two sections made of Keyaki (Zelkova) and Hinoki (Cypress) woods. Original Bengara Urushi lacquer finish and hand made bronze hardware including the stylized Mokko handles. Sliding doors all open to spacious storage areas with removable shelves as well as five organizing drawers.. A trick lift-up and out door hides an area for additional storage...

An antique Japanese Kannon Biraki Tansu (wedding kimono chest) made of Kiri (Paulownia) wood. The top section has two doors with a special lock from the inside that secures the doors. When open the doors reveal one large drawer and two smaller drawers on the right hand corner. The lower drawer has a secret compartment for documents. The bottom section has two large drawers. Both drawers have opposing hand holds cut into the interior sides for easy carrying...

An antique Japanese Kansai 2 section tall Todana Tansu made of solid Keyaki (Zelkova) and Hinoki (Cypress) woods. Hand made iron fittings and hardened wooden nail and iron nail construction. Traditional Japanese joinery throughout this lovey chest. Shunkei style lacquer reveals the beautiful grain pattern which evokes visual movement. Side wood supports typical of Kansai region tansu.

Age: Meiji Period (1868-1912)

Dimensions: 66" High x 41 3/4" Wide x 23 3/4" Deep

A large Kansai area issho tansu made from keyaki and sugi woods. Copper handles are used on the sliding door panels and a special cabinet with a lock is set on the bottom area of the chest. Tansu such as these were often placed in the private quarters of the home and clothes, family documents, and important objects were placed inside. Age: Meiji Period Size: Length 45.75" Width 18.25" Height 60"

An antique Japanese Kansai Choba Tansu (merchant chest) made of Hinoki (Cypress) and Suginoki (Cryptomeria) woods. Beautiful original Urushi lacquer finish and hand made iron fittings including the Warabite handles. Sliding doors hide a spacious area that was used to store business books and records while the 11 drawers held all things suitable for a merchant e.g. writing brushes, inkstone, receipts, valuables and money.

Each side has handles for carrying about the chest. The swivel ...

An antique Japanese Kansai Choba Tansu (merchant chest) made of Hinoki (Cypress) wood. All original hand forged iron hardware. 6 exterior drawers with 2 sets of sliding doors. Upper doors and the left side of the lower doors originally used to store merchant books and records. Right side of lower doors has three additional drawers for storage of valuables. Access to the secret drawer is found by removing the lower doors, pushing back a wood bar above the upper drawer and removing the center...

An antique Japanese Kansai Daiku Tansu (carpenter chest for tools and hardware) made of Hinoki (Cypress) and Sugi (Cryptomeria) woods. 14 drawers of various sizes used to store tools and hardware used by a Japanese wood craftsman. Japanese woodworking techniques used in making this chest include through mortise and tenon joinery and hardened wood nails. Original hand forged iron hardware including the Kakute handles. Originates from the Kansai region of Japan.

Age: Early Meiji Era (...

An antique Japanese Kansai merchant display store tansu made of Hinoki (Cypress) and Suginoki (Cryptomeria) woods. Constructed using through mortise and tenon Japanese joinery with horizontal side ribs for strength and support. Most likely used for the display of large tall items, a customized shelf could be added for an additional charge.

Age: Meiji Period (1890-1910)

Dimensions: 74 1/2" Wide by 33 1/8" High by 18 1/8" Deep